Part Number Hot Search : 
302U10A T373A N120C 2SB1300 606J05 DTV1500M SN75176 TSOP21
Product Description
Full Text Search
 

To Download 306RPFX Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 16-Channel CMOS Analog Multiplexer
306
Memory
Logic Diagram
FEATURES:
* RAD-PAK(R) technology radiation-hardened against natural space radiation * Total dose hardness: - > 50 Krad (Si), depending upon space mission * Excellent Single Event Effects: - SELTH: > 110 MeV/mg/cm2 * * * * * * * * * * * * * - SEUTH: > 110 MeV/mg/cm2 Package: 28-pin RAD-PAK(R) flat pack Guaranteed on-resistance matching between channels: < 5 max Low on-resistance < 100 max Guaranteed flat on-resistance over specified signal range: 7 max Guaranteed Charge Injection: < 10 pC INO(OFF) Leakage < 2.5 nA at +85C ICOM(OFF) Leakage < 20 nA at +85C ESD Protection > 2000V Single-supply operation (+4.5V to +30V) Bipolar-supply operation (4.5V to 20V) Low power consumption, < 1.25 mW Rail-to-rail signal handling TTL/CMOS-logic compatible
DESCRIPTION:
Maxwell Technologies' 306 high-performance, high-precision, monolithic, CMOS analog multiplexer features a greater than 50 krad (Si) total dose tolerance, depending upon space mission. The patented radiation-hardened RAD-PAK(R) technology incorporates radiation shielding in the microcircuit package. Using Maxwell's radiation hardened RAD-PAK packaging technology, this single-ended 1-of-16 device offers very low (less than 100) on-resistance which is matched to within 5 between channels and remains flat over the specified analog signal range. The 306 also offers low leakage over temperature and fast switching speeds. The 306 operates with a single +4.5V to +30V supply, or bipolar 4.5V to 20V supplies, while retaining TTL/CMOS- logic input compatibility and fast switching. Maxwell Technologies' patented Rad-Pak packaging technology incorporates radiation shielding in the microcircuit package. It eliminates the need for box shielding while providing the required radiation shielding for a lifetime in orbit or a space mission.In a GEO orbit, Rad-Pak provides greater than 50 krad (Si) total radiation dose tolerance, dependent upon space mission. This product is available with packaging and screening up to Class S.
08.15.02 Rev 5
All data sheets are subject to change without notice
1
(858) 503-3300 - Fax: (858) 503-3301 - www.maxwell.com
(c)2001 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
TABLE 1. PINOUT DESCRIPTION
PIN 1 2, 3, 13 4-11 12 14-17 18 19-26 27 28 SYMBOL V+ NC GND A3-A0 EN NO1-NO8 VCOM DESCRIPTION Positive Supply Voltage Input No Internal Connections Ground Address Inputs Enable Inputs Analog Inputs-bidirectional Negative Supply Voltage Input Output-bidirectional
306
NO16-NO9 Analog Inputs-bidirectional
TABLE 2. 306 ABSOLUTE MAXIMUM RATINGS
Parameter Voltage Referenced to VV+ GND Digital Inputs, NO, COM1 Continuous Current any terminal)2 Peak Current, NO or COM (pulsed at 1ms, 10% duty cycle max) Thermal Impedance Operating Temperature Range: Storage Temperature Range: Symbol VCC Min -0.3 -0.3 V- -2 Max 44 25 V+ +2 30 100 Units V V mA mA C/W C C
Memory
JC
TA TS
--55 -65
3.62 +125 +150
1. Signals on NO, COM, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings. 2. Or 30mA (whichever occurs first)
TABLE 3. DELTA LIMITS
PARAMETER I+ IVARIATION 10% of specified value in table 5 10% of specified value in table 5
08.15.02 Rev 5
All data sheets are subject to change without notice
2
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
TABLE 4. 306 ELECTRICAL CHARACTERISTICS -- SINGLE SUPPLY
(V+ = +12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = -55 TO +125C, UNLESS OTHERWISE SPECIFIED.) PARAMETER SWITCH Analog Signal Range 2 On-Resistance DYNAMIC2 Transition Time tTRANS VNO1 = 8V VNO8 = 0V VIN = 2.4V Figure 9 VINH = 2.4V VINL = 0V VNO1 = 5V Figure 11 VINH = 2.4V VINL = 0V VNO1 = 5V Figure 11 CL = 1.0nF VNO = 0V VS = 0W TA = +25C 9 -130 450 VNO VCOM RON INO = -1.0mA VCOM = 3V or 10V TA = +25C 1, 2, 3 1 0 --120 12 175 SYMBOL TEST CONDITIONS SUBGROUPS MIN1 TYP1 MAX1
306
UNITS V
nA
Enable Turn-ON Time
tON(EN)
TA = +25C
9
--
--
600
ns
Memory
Enable Turn-OFF Time
tOFF(EN)
TA = +25C
9
--
--
300
ns
Charge Injection
Q
TA = +25C
9
--
--
10
pC
1. The Algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in this data sheet. 2. Guaranteed by design.
08.15.02 Rev 5
All data sheets are subject to change without notice
3
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
TABLE 5. 306 ELECTRICAL CHARACTERISTICS - DUAL SUPPLIES
(V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = -55 TO +125C, UNLESS OTHERWISE SPECIFIED.) PARAMETER SWITCH Analog Signal Range1 On-Resistance On-Resistance Matching Between Channels2, 3 On-Resistance Flatness2 Current4 VNO VCOM RON INO = -1.0 mA VCOM = 10V INO = -1.0 mA VCOM = 10V TA = +25C TA = -55 TO +125C TA = +25C TA = -55 TO +125C 1, 2, 3 1 2, 3 1 2, 3 1 2, 3 9, 10, 11 -5.0 --1.8 -1.5 -15 --60 15 100 125 5 8 7 10 5.0 SYMBOL TEST CONDITIONS SUBGROUPS MIN TYP MAX
306
UNITS V

nA
RON
RFLAT INO(OFF)
INO = -1.0 mA TA = +25C VCOM = +5V or 0V T = -55 TO +125C A VCOM = 10 VNO = 10V VEN = 0V TA = -55 TO +125C
NO-Off Leakage
COM-Off Leakage Current4 COM-On Leakage Current4
ICOM(OFF) VCOM = 10 VNO = 10V VEN = 0V ICOM(ON) VCOM = 10 VNO = 10V sequence each switch on IAH IAL VA = 2.4V or 15V VEN = 0V or 2.4V, VA = 0V
TA = -55 TO +125C
9, 10, 11
-40
--
40
nA
Memory
TA = -55 TO +125C
9, 10, 11
-50
--
50
nA
INPUT Input Current with Input Voltage High Input Current with Input Voltage Low SUPPLY Power-Supply Range Positive Supply Current I+ VEN = VA = 0V or 4.5V VEN = 2.4V, VA(ALL) = 0V or 2.4 Negative Supply Current DYNAMIC Transition Time Break-Before-Make Interval tTRANS tOPEN Figure 10 Figure 12 TA = +25C TA = -55 TO +125C TA = +25C 9 10, 11 9 10 40 -110 300 400 ns ns IVEN = 2.4V, VA = 0V or 2.4V TA = +25C TA = -55 TO +125 TA = +25C TA = -55 TO +125C TA = +25C TA = -55 TO +125C 1, 2, 3 1 2, 3 1 12, 3 1 2, 3 -1 -10 -0.075 4.5 --16 20 30 75 0.5 1 1 10 A mA V A 1, 2, 3 1, 2, 3 -1.0 -1.0 --1.0 1.0 A A
08.15.02 Rev 5
All data sheets are subject to change without notice
4
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
PARAMETER Enable Turn-On Time Enable Turn-Off Time Charge Injection1 SYMBOL tON(EN) tOFF(EN) Q Figure 11 Figure 11 CL = 1.0 nF, VNO = 0V, RS = 0, Figure 13 VEN = 0V, RL = 1 k, f = 100 kHz, Figure 14 VEN = 2.4V, f = 100 kHz, VGEN = 1V p-p, RL = 1 k, Figure 15 f = 1 MHz TEST CONDITIONS TA = +25C TA = -55 TO +125C TA = +25C TA = -55 TO +125C TA = +25C SUBGROUPS 9 10, 11 9 10, 11 9 -2 -55 MIN -TYP 130 MAX 200 400 150 300 10
306
UNITS ns ns pC
Off Isolation5
VISO
TA = +25C
9
--
-69
--
dB
Crosstalk Between Channels
VCT
TA = +25C
9
--
-92
--
dB
Memory
Logic Input Capacitance NO-Off Capacitance
CIN
TA = +25C TA = +25C
9 9
---
8 8
---
pF pF
CNO(OFF) f = 1 MHz VEN = VNO = 0V Figure 16 CCOM(OFF) f = 1 MHz VEN = 2.4V Figure 16 CCOM(ON) f = 1 MHz VEN = 0.8V Figure 16
COM-Off Capacitance
TA = +25C
9
--
130
--
pF
COM-On Capacitance
TA = +25C
9
--
140
--
pF
1. Guaranteed by design. 2. Characterized and not 100% tested. 3.
RON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at the extremes of the specified analog signal range.
4. Leakage parameters are 100% tested at the maximum rated hot temperature and guaranteed by correlation at +25C. 5. Off isolation = 20log VCOM/VNO, where VCOM = output and VNO = input to off switch.
08.15.02 Rev 5
All data sheets are subject to change without notice
5
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 1. ON-RESISTANCE VS. VCOM (DUAL SUPPLIES)
306
Memory
FIGURE 2. ON-RESISTANCE VS. VCOM AND TEMPERATURE (DUAL SUPPLIES)
08.15.02 Rev 5
All data sheets are subject to change without notice
6
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 3. ON-RESISTANCE VS. VCOM (SINGLE SUPPLY)
306
Memory
08.15.02 Rev 5
All data sheets are subject to change without notice
7
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 4. ON-RESISTANCE VS. VCOM AND TEMPERATURE (SINGLE SUPPLY)
306
Memory
FIGURE 5. OFF LEAKAGE VS. TEMPERATURE
08.15.02 Rev 5
All data sheets are subject to change without notice
8
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 6. ON LEAKAGE VS. TEMPERATURE
306
Memory
FIGURE 7. CHARGE INJECTION VS. VCOM
08.15.02 Rev 5
All data sheets are subject to change without notice
9
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 8. SUPPLY CURRENT VS. TEMPERATURE
306
Memory
FIGURE 9. OVERVOLTAGE PROTECTION USING EXTERNAL BLOCKING DIODES
08.15.02 Rev 5
All data sheets are subject to change without notice
10
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 10. TRANSITION TIME
306
FIGURE 11. ENABLE SWITCHING TIME
Memory
FIGURE 12. BREAK-BEFORE-MAKE INTERVAL
08.15.02 Rev 5
All data sheets are subject to change without notice
11
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 13. CHARGE INJECTION
306
306RP
FIGURE 14. OFF ISOLATION
Memory
306RP
08.15.02 Rev 5
All data sheets are subject to change without notice
12
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 15. CROSSTALK
306
Memory
FIGURE 16. NO/COM CAPACITANCE
306RP
08.15.02 Rev 5
All data sheets are subject to change without notice
13
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
FIGURE 17. PACKAGE OUTLINE DIAGRAM
PIN #1 INDEX MARK
306
e
28LDFP
b S1 E1 E c Q E2 E3 L
D
A
Memory
28-PIN RAD-PAK(R) FLAT PACKAGE
SYMBOL A b c D E E1 E2 E3 e L Q S1 N .360 .062 .000 DIMENSIONS MIN .190 .015 .004 -.380 -.180 .030 NOM .207 .017 .005 .720 .410 -.250 .080 .050 BSC .370 .073 .027 28 .380 .081 -MAX .224 .022 .009 .740 .420 .440 ---
F28-02 All dimensions in inches
08.15.02 Rev 5
All data sheets are subject to change without notice
14
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
306
Important Notice: These data sheets are created using the chip manufacturers published specifications. Maxwell Technologies verifies functionality by testing key parameters either by 100% testing, sample testing or characterization. The specifications presented within these data sheets represent the latest and most accurate information available to date. However, these specifications are subject to change without notice and Maxwell Technologies assumes no responsibility for the use of this information. Maxwell Technologies' products are not authorized for use as critical components in life support devices or systems without express written approval from Maxwell Technologies. Any claim against Maxwell Technologies must be made within 90 days from the date of shipment from Maxwell Technologies. Maxwell Technologies' liability shall be limited to replacement of defective parts.
Memory
08.15.02 Rev 5
All data sheets are subject to change without notice
15
(c)2002 Maxwell Technologies All rights reserved.
16-Channel CMOS Analog Multiplexer
Product Ordering Options
Model Number 306 RP F X Feature Option Details
306
Screening Flow
Monolithic S = Maxwell Class S B = Maxwell Class B I = Industrial (testing @ -55C, +25C, +125C) E = Engineering (testing @ +25C
Memory
Package
F = Flat Pack
Radiation Feature
RP = RAD-PAK(R) package
Base Product Nomenclature
16-Channel CMOS Analog Multiplexer
08.15.02 Rev 5
All data sheets are subject to change without notice
16
(c)2002 Maxwell Technologies All rights reserved.


▲Up To Search▲   

 
Price & Availability of 306RPFX

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X